The AT93C46A provides 1024 bits of serial electrically erasable programmable read only memory (EEPROM) organized as 64 words of 16 bits each. The device is optimized for use in many industrial and commercial applications where low power and low voltage operation are essential. The AT93C46A is available in space saving 8-pin PDIP, 8-pin JEDEC, and 8-Pin TSSOP packages.
The AT93C46A is enabled through the Chip Select pin (CS), and accessed via a 3- wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift Clock (SK). Upon receiving a READ instruction at DI, the address is decoded and the data is clocked out serially on the data output pin DO. The WRITE cycle is completely selftimed and no separate ERASE cycle is required before WRITE. The WRITE cycle is only enabled when the part is in the ERASE/WRITE ENABLE state. When CS is brought "high" following the initiation of a WRITE cycle, the DO pin outputs the READY/BUSY status of the part.
|
|
• Low-Voltage and Standard-Voltage Operation 5.0 (VCC = 4.5V to 5.5V) 2.7 (VCC = 2.7V to 5.5V) 2.5 (VCC = 2.5V to 5.5V)• 3-Wire Serial Interface• 2 MHz Clock Rate (5V) Compatibility• Self-Timed Write Cycle (10 ms max)• High Reliability Endurance: 1 Million Write Cycles Data Retention: 100 Years ESD Protection: > 4,000V• Automotive Grade and Extended Temperature Devices Available• 8-Pin PDIP, 8-Pin JEDEC SOIC, and 8-Pin TSSOP Packages
|
Post a Buying Lead
Required Field 
